...anyone that has a line on how to get rudder pins for the 30. Rather than machine them I was wondering if anyone knows where to get their hands on a set.

Thanks,

Vin McAteer
vm354@cox.net

I know this may sound silly, you may have already called them, and if they do have them they will not be cheap is J/Boat.

David
#398

Nah...been there, done that already. You need to call TOPS IN QUALITY...somewhere in the forum there is a thread with my name on it ...they are in the midwest...indiana? They have the drawings/specs for all metal bits. And nobody has them on the shelf. Oh, I think that Rigrite had a gudgeon after the fire still...good luck dealing with them.

"Tops in Quality" is a Stainless Steel Fabricator specializing in marine hardware. They are located at 314 E. Huron Blvd, Marysville, MI 48040. Marysville is just outside of Port Huron, MI. Tel: 810-364-7150; FAX: 810-364-7925; email = sales@topsinquality.com
Their web address = www.topsinquality.com
Good luck with them, please let us all know if they can help the J-30 fleet.

Thanks folks...I will let you know how I make out.

The wiggle in the rudder gets to be a pain in the ass sometimes. I need to get this done.

V

Thanks for the input on TOPS... I know I had the info...but its buried in a file somewhere. The guy I spoke to (Gary???) said he has ALL the j30 drawings for metal bits... and in fact sent me a copy of the rudder bits...even though he didn't make them. Very helpful