Posted By: pez
Engine Housing Access Hatch - 11/09/20 05:38 PM
Now I don't have to remove the stairs to check the oil or align the prop.
Posted By: B Davis
Re: Engine Housing Access Hatch - 11/12/20 06:24 PM
So that's where you put it. Good idea for this winter.
Anyone else align their prop for racing?
Posted By: Rob Van Name
Re: Engine Housing Access Hatch - 11/13/20 03:11 PM
I have a round access port just aft of the engine cover to align the prop. Every little bit of drag reduction helps.
Posted By: Kellen
Re: Engine Housing Access Hatch - 12/11/20 04:40 PM
I've been wanting to do this on Mouse. Were you able to remove the engine housing from the boat to cut the hole or did you just make a big fiberglassy-dusty mess inside the boat to do it?
Posted By: pez
Re: Engine Housing Access Hatch - 12/11/20 04:50 PM
Posted By: Michael L
Re: Engine Housing Access Hatch - 12/18/20 08:32 PM
Align prop for racing? Always.