J/30 Class Association Forums J/30 Forum The Boat, Sails and Equipment Source for bow/skene chocks, Sanitation tank.

Fellas:

First, one of my bow skene chocks is broken. I'm not sure if this is a stock part. The 1/4" fasteners are on a 5-1/8" center so are not an easy find. What's the stock part source and part number or an alternative that i might use without having to fill and re-drill the holes?

Second, Since I'm needing to replace the sanitation tank pump out hose and deck fitting, I'm considering replacing the black water tank as well. I'd like one that will fit in the stock location but I would like one with in/out fittings coming in from the top or upper part of one of the sides. I think the practice of never having a fitting on the bottom of the sewage tank helps prevent the inevitable mess.

I'd also add another vent on the STBD side to compliment the port side vent to try to get some O2 cross-flow in the tank.

Any supplier ideas for a tank?

thx
joe