J/30 Class Association Forums J/30 Forum The Boat, Sails and Equipment Exhaust water mixing elbow

Ok - looks like the 2QM15 has the same variations as the 2GM. Some engines use a elbow with a 180 degree bend like the one Jim referenced (picture on Torrensen Marine) here: http://shop.torresen.com/ships_stor...ar&pn=104214-13521&storetype=mdd

Others have a smaller angle bend like the one that Rob referenced for Mango Madness. My 2GM uses and elbow with a 90 degree bend, and I've seen other 2GMs that have the 180 degree bend. There's a good picture of the 90 degree bend version here: http://j30.us/files/Rhapsody_Yanmar_Rebuild_Winter_2006-2007.pdf

So - determine what configuration your 2QM15 has for the elbow, then get the appropriate part based on that. Herb - If you have a picture send it along and we can help.