I have just dropped my boat (Hull 25) off at Annapolis Gelcoat and am waiting on quotes for solving my wet core problem. I went over the boat with Steve at Annapolis Gelcoat and my situation looks pretty severe. A section of about 3' X 5' has delaminated and the core will need to be replace (about $3,500), the while starboard side below the waterline is showing high moisture content and his is uggesting peeling the gel coat, drying out the core as much as possible with heat and vacuum, and then re-gel coating and barrier coating. I will probably have both sides peeled and re-done since the cost to do both sides isn't significantly higher than the cost to do one, but will only heat/vacuum dry the starboard. This process is probably going to run about $9,000.
