My pulpit broke. To be specific, the weld holding the starboard aft mounting flange broke. I've removed the pulpit and am currently finding someone to re-weld the port and starboard aft flanges. The weld holding the port aft flange was starting to let go too.
This is my first experience remounting deck hardware and I'd like to know what the appropriate bedding compound is. I'm quite clueless as to what I should be using.
I was quite surprised that the (original?) stuff was still very flexible and still a little sticky. I'm assuming the stickier the better.
On a side note, I'm happy to report that the deck looks quite solid around the holes. So it looks like it was done properly to begin with. I certainly want to at least match the integrity of the previous mounting job on the re-mount. Any advice would be welcome.
