|
M |
T |
W |
T |
F |
S |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
31
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
Forums28
Topics4,053
Posts19,271
Members1,062
| |
Most Online1,565
May 14th, 2026
|
|
|
|
Joined: Apr 2004
Posts: 457
Senior Member
|
|
Senior Member
Joined: Apr 2004
Posts: 457 |
I'm planning to replace my antiquated, heavy aluminum headfoil/nonfunctioning furler with a new wire headstay and tuff luff.
Does anybody know the complete specification-length, turnbuckle size etc etc. Approximate cost?
|
|
|
|
|
Joined: Mar 2000
Posts: 124
Senior Member
|
|
Senior Member
Joined: Mar 2000
Posts: 124 |
Can't help you with the length, but I'll offer one bit of advice. Take a look at the Ronstan Sealoc calibrated turnbuckles. Less total throw length, but an order of magnitude easier to adjust. We went to them for our shrouds, when we replaced them. (New hardware, every quarter century, that's my motto!) We'll do the same on the headstay when it gets replaced in a season or three.
- David
|
|
|
|
|
Joined: Apr 2000
Posts: 679
Governor at Large
|
|
Governor at Large
Joined: Apr 2000
Posts: 679 |
We installed a new Tuff Luff on Thursday of the NA's after breaking ours restepping the mast. Extrusion 1706-36, no hardware $288 through my sailmaker from Shaefer (possibly discounted considering the circumstances). This is for a #6 Luff tape (check with your sailmaker if you don't know). 36 Feet long, it needed several feet hacksawed off to fit. You'll want a feeder, top and/or bottom spacer. Maybe a top cap, pre-feeder, and Kevlar bumper. See www.tuffluff.com
|
|
|
|
|
Joined: Mar 2000
Posts: 173
Senior Member
|
|
Senior Member
Joined: Mar 2000
Posts: 173 |
Steve, I believe the original equipment was a "Headfoil" system. Several years ago I replaced the plastic extrusion on Mondial. I called the Headfoil office and found them to be both very knowledgeable about the original J/30 specs as well as very helpful. Here's the contact information from the "Marketplace" page: http://www.headfoil.com Headfoil Corp. P.O. Box 449 Lake City, MN 55041 Mary Lagerquist (612) 345-4115
|
|
|
|
|
Joined: May 2007
Posts: 268
Senior Member
|
|
Senior Member
Joined: May 2007
Posts: 268 |
Steve... the headfoil 2 has the advantage of being able to hold both #5 and #6 tapes. I switched mine in April, after buying yet another tuffluff, and some sails that the sailmaker SWORE were #5. There is also a #5 tape with a different size... can't remember which sailmaker. All a pain... if you are borrowing sails/buuying used ones... But I guess Meanie doesn't have those issues? By the way, can I borrow the swim team again in April?
|
|
|
|
|
Joined: Dec 2005
Posts: 15
Member
|
|
Member
Joined: Dec 2005
Posts: 15 |
Swim team is all ready and can't wait. Goals this year are drink less and take slower route to brain trust should questions arise (well maybe I can accomplish one of those).
And Meanie's issue with sails is to stop putting holes in them.
MB
|
|
|
|
|
Joined: Apr 2004
Posts: 457
Senior Member
|
|
Senior Member
Joined: Apr 2004
Posts: 457 |
|
|
|
|
0 members (),
171
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
