J/30 Class Association Forums J/30 Forum One Design Class Rules J/30 Class Approved Replacement Winches

Why?

Hi all,

I'd like to replace my primary winches. Anyone know if there is an updated list of approved winches? I'm considering the lewmar evo 40ST. The last list I've been able to find is from 2011.

Thanks,

Rob Bjornson
#270 "Bayou Bleu"

Hi,

I will update the list of approved winches and post as soon as possible.

Larry Christy
Chief measurer

An updated list of approved winches is attached. The goal is to keep the power ratio's and weight as close as possible to the original Barient winches. Both Lewmar and Harken have changed some of their model numbers but haven't made significant changes in the winches. Alloy, chrome, and stainless are permitted. There was a company in Australia making parts for the Barients. Will try to find a link and post it. Larry Christy Measurerer

Table of Approved Winches for the J30

March 21, 2017

 

 

Winch	Power Ratio	Weight (lbs.)
Primaries - 2 speed
   Barient 25 (Original)	44:1 and 14:1	11.9
   Lewmar 40 Evo	40.2:1 and 13.2:1	8.6
   Lewmar 45	44.8:1 and 13.9:1	10.8
   Harken 40	39.9:1 and 13.5:1	9.6
Secondary â€" 2 speed
   Barient 21 (Original)	30:1 and 7.1:1	9.3
   Lewmar 30	29.2 and 13.8:1	12.3
   Harken 35	36:1 and 13.5:1	7.3
Halyard â€" 1 speed
   Barient 10 (Original)	7.6:1	3.7
   Lewmar 8	7.9:1	3.09
   Harken B8 or B8	7.5:1	2.31

 

Either alloy, chrome or stainless are permitted

 

Approved by

Larry Christy

J 30 National Class Measurer

March 21, 2017

Hi Larry,

Thanks for updating the list.

The Australian company with Barient parts is hutton: http://huttonwinches.com. I was able to get a gear I needed for my barient from them.

Rob

Martec Mark III folding prop
Martec has discontinued manufacture of the prop since April1, 2017. I contacted Gary Beck, owner, today to order a new prop. He will build me one with new and used parts but will soon not even have that option.

He also told me that most of the folding props now use a 1" shaft which my boat has but do not make props for 3/4" shafts.

We need to find a new prop for both 3/4" and 1" shafts!

Can anyone tell me what length bolts I need for the primary winches?

Thanks

Paul

Can a site admin please move the DOC to the INFO menu section for posterity?