J/30 Class Association Forums J/30 Forum The Boat, Sails and Equipment Vermiculite Replacement?

I don't believe there is a way to drain the engine bilge area other than weeping through the holes made by the 3 hoses that pass through the aft face of the main bilge. See reglassing pic.
I think I will drill drain holes into the aft face of the main bilge to allow the engine bilge to drain better.
I don't know if there is vermiculite under there.
I have HULL#484 and am buried in snow. This will have to wait til Spring. There is at least antifreeze mixed with the water in there now.