Hi all,
Sorry for the delay, just had a chance to go look at everything again. Used a volt meter to isolate that power was getting to the charger but not beyond, and the internal output meter on the charger is stuck at zero. In fact, when I apply power to the charger the internal breaker blows.
My charger is a Readi Amp 8 (2 bank 12 volt VDC 8 amps). A quick google search mentions that this particular charger is a "battery killer". Does any one have any advice on if the charger can be serviced or what type of charger I should replace it with?
The last thing I can think to check is if the batteries are still good. I'm planning to charge them with a plug in trickle charger later, but is there anything else I should do to interrogate the batteries?
Thanks! Cameron
