While prepping the prop shaft and prop on Joust (Hull #42) I realized that the cutlass bearing is worn out. I've never replaced one before and have some questions about it. I'm confident that I can manage the task myself, but thought I would seek council before I make the attempt.
I would especially like to find info on the replacement part, size or part number and recommendations on where to get one. Any tips or tricks in doing the swap would also be welcomed.
Are there any screws holding the bearing in place? If so, are they on the aft end toward the prop or forward toward the bow? Are they at the usual 9 and 3 o'clock positions (I've seen boats that had 2 screws holding the bearing in place)? If there are any I'll have to remove paint to get to them so it would be helpful to know where any are.
Knowing that I'm going to have to remove the shaft, this might be a perfect opportunity to upgrade to a dripless stuffing box. What size/part number would I need?
I look forward to your input!
Brian.
