Where are the electrical wires and antenna cable supposed to run after leaving the mast? Currently, mine exit thru a hole about 12 inches from the base of the mast and then go directly into the access compartment next to the potty were the knotmeter/depth sounder transducers and the potty seacock are. Because they go directly in thru the top, I can't really put a lid on that compartment, at least not without putting a hole in the lid. Not a very clean installation. I've noticed that the bottom of the mast has a inverted "V" notch at the aft. Does anyone run the mast wiring out thru that hole? I was thinking of drilling a hole into the side of access compartment and running wiring in thru the hole, that way I could put a lid on the access compartment.
