[The oulet I was referring to was the one on the tank. The old hose takes a pretty radical turn to go under the tank to the pump out fitting. I going to try and thread the hose between the side of the tank and the boat. it will be a tight fit, but It will not have to turn as sharp.
QUOTE]Originally posted by Rhapsody #348:
Most of the boats I've seen have the deck pumpout fitting near the bow, close to the holding tank. No matter where you run the hose, Geoff is correct on heating it. I installed mine when it was 20 degrees outside to keep the odor down, and residual "stuff" solid. The heat gun did the trick on making the hose flexible.[/QUOTE]
