Thanks for the picture, thats how I was going to do it with out the y-valve. It looks like you have the same hose and it fits beside the tank.
Phantom

Quote
Originally posted by Rhapsody #348:
Making the turn is doable if you use a heat gun to slowly bend the radius you need. If you were going to drill another hole in the holding tank (not recommended), I'd drill it on the top and thread a pickup tube to the bottom. That way if there is ever a leak, nothing free flows into the boat. Here's a picture of the holding tank outlet on Rhapsody. The wires connect to the Macerator Pump Switch that wasn't installed when the photo was taken.
[Linked Image from j30.us]

Phantom364
Phantom364.blogspot.com