I was looking at build #51 as a possible purchase but noticed a couple of things which may or may not be of concern.
1. the main electrical switch was located on the starboard side by the cooler. On all others I noted it is fitted to port by the galley. any thoughts why thisshould be.
2. I recall reading somehwere that the hull to deck was bolted every 4 to 5 inches. This is bolted every 6 inches and it has NO washers under ANY of the nuts. Surelty this could lead to the nuts breaking down the GRP?
Any thoughts?
Thnx.
PS Were all boats factory fineshed or could they be purchased for home build?
