J/30 Class Association Forums J/30 Forum The Boat, Sails and Equipment Cutlass Bearing

Stefan - on Rhapsody with a 1" shaft, the spec for a replacement Cutlass bearing made by Duramax - 1" ID / 1-1/4" OD are referred to by the following names
Bearing Babe (non-metallic) or
Bearing Back (Brass)
Look at the Non-metalic chart here and Brass bearing chart here

I had to cut the bearing to length.

The PSS shaft seal you have is the same as on Rhapsody. You need to remove the SS collar (held on shaft by allen screws) that provides the seal against the carbon surface in order to pull the shaft out.