J/30 Class Association Forums J/30 Marketplace Sails & Equipment for Sale SOLD Parts Available from 1979 J/30 in Chicago

Update as of 5 May 2010

I have a few parts remaining from the demolition of our J/30. Here is a partial list of equipment that hopefully brings new life from old.

• Lots of deck original hardware, including chainplates, anchor locker cover, tracks, cars, padeyes, etc.
• Electrical panels, lights, etc.
• A few Barient #10 and #16 winches (no two-speeds or self-tailers).
• Engine cover
• Table
• Stern pulpit, stanchions w/gates
• Some interior cabinetry
• Full set of beige cushions that are fundamentally sound, but with numerous significant stains (would need to be died to a darker color).
• Water tank
• Standard marine toilet
• Original running rigging items (note: we can accommodate your new rigging needs too)
• 2006 Harken MK IV Furler. Complete with new wire headstay. Located in Chicago. $1,500. Call for details

Let me know what you might need that is not shown here. I may be able to accommodate you.

Alan Veenstra - Alan@chicagosailing.com or 773 791 7923, or 773 252 3700

Update as of 16 Oct 2010

I have a few parts still remaining from the demolition of our J/30. Here is a list of the equipment remaining.

• Lots of deck original hardware, including chainplates, anchor locker cover, tracks, cars, padeyes, etc.
• Stern pulpit
• some misc rigging.
• interior parts, including cabinetry, table and tanks, etc
• 2006 Harken MK IV Furler. Complete with new wire headstay. Located in Chicago. $1,300. Call for details

Let me know what you might need that is not shown here. I may be able to accommodate you.

Alan Veenstra - Alan@chicagosailing.com or 773 791 7923, or 773 252 3700

Do you still have the boom?

Steve,

Sorry, the boom is sold.

alan

Alan-

Someone is looking for a table in another thread on this forum, if you still are trying to sell yours.

Steve

Update as of 6 Sept 2011

A SAD PARTING-OUT. We still have some valuable J30 parts available. Contact me for any parts you might need to improve the value of your own boat. Here is a list of what remains:

• Lots of deck original hardware, including chainplates, anchor locker cover, tracks, cars, padeyes, etc.
• deck hardware
• pulpits and stanchions
• Mast (black anodized), no rigging or spreaders
• Boom
• interior parts
• Harken furler, complete with headstay, ready to go $1,400 - Call for details

I do not have any electronics, sails, winches, tiller or rudder

Alan Veenstra - Alan@chicagosailing.com or 773 791 7923, or 773 252 3700

Let me know how much for the pulpits (both) and 4 stanchions with base ivanjrod@gmail.com 787-667-7778

Is the boom still available?

Update as of 17 May 2012

A SAD PARTING (and even sadder PARTING-OUT) We were recently forced to scrap our 1979 boat. Before doing so we removed everything of value. Contact me for any parts you might need to improve the value of your own boat. The engine, rudder, are sold, but many other items are available Ask about anything else of interest.

• MAST- no rigging or spreaders $1,500
• BOOM- complete, no bends or dings $250
• FURLER- 2006 Harken MK IV, Complete with new wire headstay. Located in Chicago. $1,500.
• SOME Deck Hardware, but no winches, no hatches.
• SOME INTERIOR- tanks, chart table, etc
• STERN PULPIT and BOW PULPIT- no bends or dings. $225 each

Contact Alan Veenstra - Alan@chicagosailing.com or 773 791 7923, or 773 252 3700