|
|
|
M |
T |
W |
T |
F |
S |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
31
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
Forums28
Topics4,053
Posts19,271
Members1,062
| |
Most Online1,565
May 14th, 2026
|
|
|
|
Joined: May 2020
Posts: 41
Senior Member
|
|
Senior Member
Joined: May 2020
Posts: 41 |
Has anyone ever replaced the legs for the original table? The previous owner for my hull 395 had some wonky PVC shimmed with duct tape (real, real wonky). Any suggestions on size, material, and length for replacements?
|
|
|
|
|
Joined: Jan 2019
Posts: 8
Forum Newbie
|
|
Forum Newbie
Joined: Jan 2019
Posts: 8 |
Yes. Originals were corroded at the bottom. Ordered aluminum tubing from Speedy Metals, cut and drilled using the old ones as patterns.
|
|
|
|
|
Joined: May 2020
Posts: 41
Senior Member
|
|
Senior Member
Joined: May 2020
Posts: 41 |
I don't have the original legs. Any suggestion on size and length? I am wondering about how tight the fit was in the top or bottom holes? And were they the same diameter on top and bottom, etc?
|
|
|
|
|
Joined: Sep 2021
Posts: 36
Senior Member
|
|
Senior Member
Joined: Sep 2021
Posts: 36 |
The legs for my table were made by the previous owner. There’s a carbon tube from a wind surfer mast. It’s 27 3/4 long 2 in od. Into one end is a piece of Al tube 4 in showing and 12 in total so 8 in is jammed into the carbon tube. Al tube is 1 3/4 in od. Overall length is 31 3/4 in. The Al end goes into a tube that’s fiberglassed into the bilge. Dan #409
|
|
|
|
0 members (),
144
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
